3DPrinterforBeginners.com

Sign in Subscribe

3D Printing 101

3D Printing 101: Beginner Guides to Get You Started

3d print infill

3D Print Infill: Best Density, Patterns & Slicer Settings Guide

Infill is the invisible skeleton inside every 3D print — and the setting most beginners either ignore or max out to 100%. Here's how to pick the right density and pattern without wasting filament or print time.

3D Print Brim

3D Print Brim: Best Settings & How to Add One in Your Slicer

Most prints don't warp because of bad filament. They warp because of a missing single-layer ring that takes 10 seconds to enable in your slicer.

Resin vs Filament 3D Printer

Resin vs Filament 3D Printer: Which Should You Choose?

Resin delivers stunning detail. Filament handles everything else. We compare both across 7 factors to help you pick the right one.

3D Printer Ironing

3D Printer Ironing: Setup Guide & Best Settings for Beginners

3D printer ironing smooths the top surface of your print by re-melting the plastic with a second nozzle pass. This guide covers what ironing does, when to use it, the best settings for PLA, PETG, and ABS, and how to enable it in Bambu Studio, PrusaSlicer, and Cura.

Why a 3D Printer Cannot Have Floating Layers (And How to Work Around It)

Why a 3D Printer Cannot Have Floating Layers (And How to Work Around It)

A 3D printer cannot have floating layers because molten plastic needs a solid surface underneath to bond to. Here are 5 ways to work around this limitation.

How to Remove 3D Print from Bed hero

How to Remove a 3D Print from the Bed (Without Damaging It)

Learn 6 safe methods to remove a 3D print from the bed without damage. Covers PLA, PETG & TPU removal, glass bed tips, and prevention for stuck prints.

How to Use a 3D Printer

How to Use a 3D Printer: Step-by-Step Beginner’s Guide

Learn how to use a 3D printer from unboxing to finished print. 5 clear steps covering setup, slicing, printing, and post-processing, plus quick fixes for common beginner problems.